Setting - Siemens C35 User Manual

Setting

Setting
Setting Setting
The phone number of the service
centre can be entered here and oth-
er settings can be made.
Î
then select one of the fol-
lowing functions.
###########
###########
Service Centre Service Centre
Service Centre Service Centre
Enter or change the service centre
phone number supplied by the serv-
ice provider.
Message Type Message Type Message Type Message Type
Select a message type for sending
to special terminals. The different
message types (e.g. e-mail) may be
assigned to different service centre
phone numbers. Contact your serv-
ice provider for details.
The current setting is displayed after
the function has been called up. To
change the setting:
Messages Messages
Messages Messages
Î
,
Select the required type.
###########
###########
Variable (default) Variable
Variable Variable
The message type has to be con-
firmed each time before it is sent.
Standard text Standard text
Standard text Standard text
All messages are transferred as nor-
mal SMS messages.
Telex, Fax, Email, X400 Telex, Fax, Email, X400
Telex, Fax, Email, X400 Telex, Fax, Email, X400
Special types of messages.
New New New New
You may need to obtain the code
number from the service provider.
Validity Period Validity Period
Validity Period Validity Period
Select the period in which the serv-
ice centre is to attempt to deliver the
message:
Status Report Status Report
Status Report Status Report
You will receive confirmation of
whether or not a message you have
sent has been delivered. This serv-
ice may be subject to a charge.
Direct Reply Direct Reply
Direct Reply Direct Reply
The answer to your message is han-
dled via your service centre (contact
your service provider for details).
39