Fax/Data - Siemens C35 User Manual

Technical Information Technical Information
Technical Information Technical Information
Fax/Data Prerequisites Fax/Data Prerequisites
Fax/Data Prerequisites Fax/Data Prerequisites
Fax and data services must be ena-
bled.
Depending on the network, there
are several different types of fax/da-
ta reception, so you should check
with your service provider.
Your PC must have appropriate soft-
ware installed for data/fax communi-
cation.
Connecting Units Connecting Units Connecting Units Connecting Units
A data cable (see page 68) is used to
connect the phone to the PC's serial
port.
Setting the PC Setting the PC
Setting the PC Setting the PC
Your phone has an integral modem.
You will need to install a standard
modem in your PC's operating sys-
tem:
• Standard modem with
19 200 bit/s
• Fax Class 1 modem,
max. 9 600 bit/s
Sending Fax or Data Sending Fax or Data
Sending Fax or Data Sending Fax or Data
• During a call:
First set the
(page 57) and then start your PC's
communication program.
• Fax only:
Start your PC communication pro-
gram. Enter the required destination
phone number.

Fax/Data

Fax/Data
Fax/Data Fax/Data
Receive Fax or Data Receive Fax or Data Receive Fax or Data Receive Fax or Data
Before you receive data/faxes,
establish the connection between
the phone and the PC and start
the communication program on
your PC.
The phone display will indicate the
type of call (fax or data) and you will
hear a special signal tone.
Ending Transmission Ending Transmission
Ending Transmission Ending Transmission
Transmission is normally ended with
the PC software. If necessary:
(
Technical Data Technical Data
Technical Data Technical Data
Modem Driver Modem Driver
Modem Driver Modem Driver
Conforms to V.25 command set.
Data Transmission Speed Data Transmission Speed Data Transmission Speed Data Transmission Speed
Conforms to the ITU-T standard of
V.22bis (transfer at 2400, 4800 and
9600 bit/s).
Telefax Telefax
Telefax Telefax
Facsimile operation at 2400, 4800,
7200 and 9600 bit/s. Conforms to
Service Class 1.
function
Press.
59