Table of Contents
Advertisement
Serial/Modem Configuration Screen 2 - Configuring Remote
Server Management Options for a Serial / Modem Connection
This screen allows you to continue to enter the necessary settings to configure the serial/modem
channel.
•
Enable Access: The Enable Access checkbox allows you to enable or disable Serial/Modem
connectivity. When checked, all of the Serial/Modem parameters are enabled and you can set
them to the appropriate values. When not checked, all of the Serial/Modem parameters on this
page are disabled.
•
Serial Privilege Level: The Serial Privilege Level dropdown list allows you to select a privilege
limit for the serial channel. This privilege level takes precedence over the user privilege limit.
If the privilege level is set at User level, for example, then users can only execute user-level
commands, even if the user privilege level is set higher than User. The possible privilege level
choices are the same as the LAN Privilege levels.
•
Connection Mode: The Connection Mode combo allows you to configure the method to
connect to the Serial/Modem connectivity. The valid choices are:
-
Direct Connect: For applications that connect to the serial/modem port directly to another
computer system.
-
Modem Mode: For applications where the serial/modem port is connected to an external
modem.
•
System Phone Number: The System Phone Number edit box allows you to enter the
phone number used to connect to this system. The length of the phone number allowed is
determined at run time. The SCW will limit the number of characters that can be entered at
runtime.
50
50
Server Platform Utilities
Server Platform Utilities
Advertisement
Table of Contents
