Configuring The Serial/Modem Channel; Serial/Modem Configuration Screen 1 - Modem Setup - MAXDATA PLATINUM 7200 IR M6 User Manual

The next screen displayed allows you to select the type of alert to receive:
• Select All Button: This button will select all of the filter checkboxes on the dialog.
• Clear All: This button will clear all of the filter checkboxes on the dialog.
Configuring the Serial/Modem Channel
The Serial/Modem channel option is available on both the Management Module - Professional Edition
and Management Module - Advanced Edition system configurations.
The Serial/Modem Connection configuration section provides the mechanism to configure the
serial/modem channel that is present on the system. The configuration of the serial/modem channel
is spread across several configuration screens. The first screen sets data specific to configuring the
modem. The second screen sets data specific to the access modes. The last screen sets data specific
to paging, if paging is desired on the server.
Serial/Modem Configuration Screen 1 - Modem Setup
When the screen comes up, the settings displayed are the current settings for the serial/modem
channel on the server. All fields on this screen are required to have valid data entered. The Continue
button is disabled/grayed out until all of the edit boxes on the screen have data entered.
• ESC Sequence: The ESC Sequence edit box allows you to enter the escape sequence string
for the modem. The string is sent to the modem before sending a command string to the
modem. The edit control will limit the number of characters that can be entered for the ESC
Sequence string to 5.
• Hangup String: The Hangup Line edit box allows you to enter the hangup ling string. This
string is sent to the modem whenever the EMP wants to terminate the session. The EMP
automatically sends an <Enter> character after this string. The edit control will limit the
number of characters that can be entered for the Hangup String to 8.
• Modem Init String: The Modem Init String edit box allows you to enter the modem
initialization string. This string is transmitted every time a serial/modem connection is
initialized. The string length of the Modem Init String is determined at run time and the edit
control will limit the number of characters that can be entered to that value.
• Modem Dial Command: The Modem Dial Command edit box allows you to enter the modem
dial command string. This string is transmitted every time a Platform Event Page is sent. This
string is sent before the paging string to indicate to the modem how to dial.
MAXDATA PLATINUM 7200 IR M6 MAXDATA PLATINUM 7200 IR M6 49 49