Console Configuration - MAXDATA PLATINUM 7200 IR M6 User Manual

Console Configuration
1. Boot the console into the operating system.
2. Click the Start button in the task bar.
3. Select Programs > Accessories > Communications and click "Hyperterminal".
4. At the Connection Description window, enter "guest" for the name and click "Ok".
5. At the Connect To window, select the COM port of the console that the Null modem is
connected. In this example, it is COM1.
6. At the COM1 Properties window, select "115200" in the Bits per second (Baud rate) box to
match what was configured on the server.
7. Select "Hardware" for the Flow Control to match what was configured in the BIOS Setup
(CTS/RTS is the hardware flow control).
8. Leave the default settings for the other boxes. Click "Ok" to accept the settings and enter the
Hyperterminal screen.
9. Power on the server. The console starts displaying the redirection once the video synchronizes
on the server.
MAXDATA PLATINUM 7200 IR M6 MAXDATA PLATINUM 7200 IR M6 39 39