Operation with the entrance
Step
by
Step
telephone
Configuring the entrance telephone
Press G for selection menus.
1.
Select using [
2.
→
Setup device.
3.
Select using [
Select using [
4.
or
Select using [
4.
Setting codes for entrance telephone "Door type 2 (DTMF)"
For entrance phones controlled by DTMF codes you can set various codes.
Please read the instructions for this entrance phone!
Press G for selection menus.
1.
Select using [
2.
→
Setup
Select using [
3.
Setting door opener code
Select using [
4.
Enter code (factory setting = #9) and confirm [
5.
Select using [
6.
Setting collective call code
Select using [
4.
Enter code (factory setting = 8) and confirm [
5.
Select using [
6.
Setting connect code
4.
Select using [
Enter code (factory setting = 9) and confirm [
5.
Select using [
6.
Setting disconnect code
Select using [
4.
5.
Enter code (factory setting = #0) and confirm [
Select using [
6.
*
This configuration is only applicable for entrance telephones in accordance with FTZ
(door opener via ring current).
** E.g. Deutsche Telekom DoorLine products
Á
] and [OK]:
Base Settings
Á
W
] and [
]: (desired internal subscriber 21 or 22).
Á
] and [OK]:
Device type
Á
] and [OK]:
Device type
Á
] and [OK]:
Base Settings
device.
Á
W
] and [
]: (desired internal user 21 or 22).
Á
] and [OK]:
Door
Á
] and [OK]:
Save
Á
] and [OK]:
Hunt group
Á
] and [OK]:
Save
Á
] and [OK]:
Connection
Á
] and [OK]:
Save
Á
] and [OK]:
Release
Á
] and [OK]:
Save
Operation with the entrance telephone
→
→
Settings
→
Door type1
→
Doortype2(DTMF)
→
→
Settings
code.
W
].
entry.
code.
W
].
entry.
code.
W
].
entry.
code.
W
].
entry.
Setup user
*
.
**
.
Setup user
79