Ring Delay; Setting Ring Delay; Picking Up Calls During Ring Delay; Conducting Calls With More Than One Subscriber - Gigaset 4170 isdn Operating Instructions Manual

Ring delay

Ring delay
Step
by
Using the ring delay feature you can configure a handset for each individual
Step
incoming MSN to delay response to the call signal. However, during this ring
delay time the handset can accept the call using the
a call signal queuing. When this feature is being configured, the time allowed
by the answering machine for recording a message (default:
must be taken into account. When the ring delay that has been set is higher
than the setting on the active answering machine, there is no call signal as the
answering machine accepts the call beforehand.

Setting ring delay

Press G for selection menus.
1.
Select using [
2.
→
Setup
Select using [
3.
Select using [
4.
Select using [
5.
Set
6.

Picking up calls during ring delay

A call is coming through to the assigned MSN.
1.
2. Press the
Press [YES] . You can then answer the call.
3.
or Press [NO] . You can set up your own external or internal call.
3.

Conducting calls with more than one subscriber

Internal enquiry call

You would like to call an internal subscriber during an external call.
Press F and enter the call number for the second subscriber.
1.
A connection is established with the internal subscriber.
F → [LIST].
or
1.
Select using [
2.
A connection is established with the internal subscriber.
If the internal subscriber dialled is busy:
3. Press [BACK]: You are reconnected with the external caller.
The internal subscriber answers the call:
or Toggling: you can switch between call parties with [
3.
or Three-way calling: press [CONF .]. This establishes the conference circuit.
3.
32
Á ] and [OK]:
device.
W
Á ] and [ ]: (required internal subscriber).
Á ] and [OK]:
W
Á ] and [ ]: (required MSN).
]
No. of rings using [
c
key, the following appears in the display:
Á ] and [OK]: (required internal subscriber).
→
Base Settings Settings
Ring delay.
¬ ¢
- ], = off.
Accept? function without
Automatic 2/4)
→
Setup user
Accept?
À ] and [ Á ].