Modifying settings
Modifying settings
Step
by
Step
Defining the number of rings
Factory setting:
follows: if there are no new messages, the announcement is activated after 4
ring cycles; if new messages have already been left, the announcement is ac-
tivated after 2 cycles. When you check your messages remotely, this enables
you to tell after 3 ring tones that there are no new messages. If you hang up
immediately, no call charges are incurred.
Select using G and
→
No. of rings
Activating/deactivating voice output of the date and time
If the time stamp is activated, all messages include the day, date and time of
recording.
Select using G and
→
Message/Memo
Defining recording length
The message can either be 1minute, 2minutes or 3minutes long, or of max-
imum length.
Select using G and
→
Message/Memo
Setting recording quality
If you set the recording quality to high, this reduces the available recording
time. At standard recording quality (which is normally sufficient), the memory
can support 35 minutes, at high quality 12 minutes.
Select using G and
→
AM quality
Activating automatic pause
When automatic pause is activated, the answering machine switches automat-
ically to pause status after a message or memo has been played back.
Select using [ G ] and
→
Automatic
62
Automatic
2/4. In this case the answering machine operates as
[OK]: Voice mail
→ (1-9) or
(Automatic
[OK]: Voice mail
→
Time
stamp.
[OK]: Voice mail
→
Message length
[OK]: Voice mail
→
High quality
or
Long
[OK]: Voice mail
pause.
→ (desired AM) →
Settings
2/4).
→ (desired AM) →
Settings
→ (desired AM) →
Settings
→ (required recording length).
→ (desired AM) →
Settings
recording.
→ (desired AM) →
Settings