Registering The Gigaset 2000 S Handset; Registering The Gigaset 1000 C/S Handset; To Register The Gigase Trepeater; Registering Gap Handsets Made By Other Manufacturers - Gigaset 4170 isdn Operating Instructions Manual

De-registering a device

For the registration process described below, the following applies:
Info
Step
You may only register a maximum of four other handsets (e.g.
by
Gigaset 2000S, GAP handsets) or wireless devices (e.g.
Step
Gigaset 1000 TAE, STA). Register these devices first.

Registering the Gigaset 2000 S handset

Handset
1.
Press [the number of the base station] and
2.
Enter the system code
3.
Press the illuminated registration key on the base station.
4.
The lowest available internal number is allocated. An available internal number
cannot be selected.

Registering the Gigaset 1000 C/S handset

For the registration process, please refer to the relevant operating manuals.
To register the Gigaset repeater
An available registration location is not required for a Gigaset repeater designed
to increase the handset range. You can register up to 6 Gigaset repeaters with
one base station (for a description see Page 76).

Registering GAP handsets made by other manufacturers.

Press the green illuminated key on the base station.
1.
Prepare the GAP handset for registration (see operating manual for the hand-
2.
set). A connection is set up between the base station and the GAP handset.
The lowest available internal number is allocated to the GAP handset. An avail-
able internal number cannot be selected by the GAP handset.
The display information depends on the GAP handset in question because the
Info
base station does not transmit display data to the GAP handset.
De-registering a device
A wireless device can be de-registered with any Comfort 4000/3000/2000
handset. Any devices still registered retain their former internal numbers.
.
1.
Press [
2.
Setup user
3. List of internal numbers is displayed.
Press [
[OK] is pressed; the device is de-registered along with the internal number.
4.
18
(off) is pressed.
h
#
or G is pressed to see the menus.
Á ] and [OK] to select:
→ De-register.
Á ] to select: (internal number required).
(on) simultaneously.
h
.
Service Set Up or Base Settings
→ →
Settings