Starting the Installation Assistant
If this function is not supported by the service provider, the MSNs must be en-
Step
tered manually; see next chapter.
by
Step
Enter own numbers (MSNs) and name for the MSNs.
You can store up to 10 numbers. For easier identification, you can enter a name
for each number.
Confirm the prompt for entering the call number with [YES].
1.
Confirm the prompt for entering the first MSN with [YES].
2.
Enter the name and with
3.
change call number and confirm with [
Select using [
4.
You are prompted for the next MSN.
Setting the device type
The factory default for the TAE connections isTelephone. This means that even
without the handset, the base station is already in its standby state with a tel-
ephone (with tone dialling/DTMF) connected to
wish to connect to another analog device (e.g. fax machine), the device type
must be changed ((see page 74)).
Select [YES] to confirm the prompt for setting the device type.
1.
Select [YES] to confirm the prompt for the internal party.
2.
Press [
3.
To confirm, press ».
To end the procedure select
4.
Allocations for further internal parties are offered.
Setting incoming MSNs
The number is used to call your handset/terminal. You can assign several
MSNs.
To confirm the incoming MSN prompt, select [YES].
1.
To confirm the allocation prompt select [YES].
2.
or
To move to the next internal number, select [NO].
2.
Press [
3.
To confirm, press ».
To end the procedure select
4.
Allocations for further internal parties are offered.
22
Z
Á
] and [OK]:
Save
Á
] and [OK] to select: (device type).
Á
] and [OK] to select: (one or more MSNs).
move to Change call number, if required enter or
].
W
entry.
Intern 21
Î
.
Î
.
or
Intern
22. If you