Connecting External Antennas - Pioneer S-EV31V Operation Instruction Manual

Stereo dvd cassette deck receiver, speaker system

Hide thumbs

Table Of Contents

100

Table of Contents

Connecting up

• Before making or changing antenna

connections, make sure that the power is

switched off and the unit disconnected

from the wall power outlet.

Pull off the protective shields of both

AM antenna wires.

Push open the tabs, then insert one

wire fully into each terminal.

Release the tabs to secure the AM

antenna wires.

Fix the AM loop antenna to the

attached stand.

To fix the stand to the antenna, bend in the

direction indicated by the arrow (fig. a) then

clip the loop onto the stand (fig. b).

• If you plan to mount the AM antenna to a

wall or other surface, secure the stand

with screws (fig. c) before clipping the

loop to the stand. Make sure the reception

is clear.

Place the AM antenna on a flat surface

and point in the direction giving the best

reception.

Don't let it come into contact with metal

objects and avoid placing near computers,

television sets or other electrical appliances.

Connect the FM wire antenna in the

same way as the AM loop antenna.

For best results, extend the FM antenna fully

and fix to a wall or door frame. Don't drape

loosely or leave coiled up.

The supplied FM antenna is a simple means

of receiving FM stations; using a dedicated,

outdoor FM antenna will usually give you

better reception and sound quality. See

Connecting external antennas on page 13 for

connection details.

• The signal ground ( ) is designed to

reduce noise that occurs when an

antenna is connected. It is not an

electrical safety ground.