Reducing The Source Signal Level - Pioneer S-EV31V Operation Instruction Manual

Using the tape deck

Reducing the source signal level

• Default setting: ATT 6DB
Some auxiliary sources may produce a high
signal level which may produce unpleasant
distortion if recorded on the built-in tape
recorder. In such cases, you may need to
reduce the signal level of the line source by
switching on the attenuator.
1 Switch the system into standby.
2 Press ENTER.
3 Use the (cursor left/right)
buttons to select the attenuation (LINE
ATT) display.
On the front panel use
4 Press ENTER.
The current setting is shown in the display.
5 Use the (cursor up/down)
buttons to select a setting.
On the front panel use
• ATT 6DB – Lowers source signal by 6dB
• ATT 10DB – Lowers source signal by
10dB (EV61 DVD model only)
• ATT OFF – Switches attenuation off
6 Press ENTER to confirm.
and .
and .
08
51
En