Resetting The Tape Counter; Changing Tape Displays - Pioneer S-EV31V Operation Instruction Manual

08 Using the tape deck
5 Press TAPE to start playback.
You can also press
panel) to start playback when TAPE is
selected.
The side of the tape you'll hear is whichever is
face up when you load it. This is the 'forward'
( ) direction, while the other side is 'reverse'
( ). The direction indicator is shown in the
display.
6 To play the other side of the tape,
press TAPE or
Each time you press TAPE (
playback, the other side of the tape starts
playing. Pressing TAPE (
stopped starts playback on the side it was
playing previously.
The current tape direction is indicated in the
display.
7 To skip back or forward a track on the
tape, press
On the front panel, press
(the tape should be playing when you do this).
searches for the next blank space
between tracks on the side currently playing
(in other words, to the start of the next track),
then resumes playback.
searches for the previous blank space
between tracks on the side currently playing
(in other words, to the start of the current
track), then resumes playback.
By pressing
tape will skip several tracks at once (up to a
maximum of 15). For example, press
twice to skip forward two tracks.
Track search is unlikely to work reliably in
the following cases:
• If the space between tracks is less than
about 4 seconds.
• If the recording is particularly noisy so the
spaces are not recognized.
48
En
(remote) or
(remote only).
) during
) when the tape is
or .
or
or more than once, the
• If the recording contains frequent
silences, such as a language study tape.
(front
• If the recording contains sections of very
quiet material, such as some classical
music recordings.
8 To pause playback, press
only).
Press TAPE (
9 To stop playback, press
10 To fast wind the tape, press
.
On the front panel, press
(the tape should be stopped when you do
this).
rewinds the tape, regardless of the tape
direction at the time.
winds the tape.

Resetting the tape counter

The tape counter display indicates the current
location of the tape. The tape counter returns
to zero automatically when you eject a tape.
To reset it manually:
• Press
The counter returns to 0000.

Changing tape displays

• Press SYSTEM DISP (remote) or
SYSTEM DISPLAY (front panel) repeatedly
to switch between the tape displays:
(remote
) to resume playback.
.
or
always forward-
while the tape is stopped.
Tape Counter
Clock
or