Editing/sending a saved message
1
MMenuN (right soft key) a
2
MbN: "Send List" a MOKN
3
MbN: Select the message. a MOKN
4
To edit the message:
MMenuN a MbN: "Edit Message" a
MOKN a Continue from step 3, "Writing
and sending a new message", page 36.
To send the message:
MMenuN a MbN: "Send" a MOKN a
Press and hold MCN to erase all numbers.
a Continue from step 4, "Writing and
sending a new message", page 36.
Erasing saved messages
1
MMenuN (right soft key) a
2
MbN: "Send List" a MOKN
3
MbN: Select a message. a MOKN
4
MMenuN a MbN: Select "Erase" or
"Erase All". a MOKN
5
MbN: "Yes" a MOKN a M
Receiving a message
When an SMS message is received:
– "Receiving SMS Message" is displayed.
– a tone is heard (if the handset ringer is
turned on).
–
is displayed with the total number of
new (unread) SMS messages.
Reading a received message
1
MMenuN (right soft key) a
2
MbN: "Receive List" a MOKN
3
MbN: Select a message.
R Messages which have already been
read are indicated by a " ".
R To erase a message, press MMenuN.
a MbN: "Erase" a MOKN a MbN:
"Yes" a MOKN
4
MOKN
PRW110BX_UE_(en-en)_1120_ver043.pdf 37
SMS (Short Message Service)
Note:
R To call the message sender, press M
a MOKN
Replying to a message
1
While reading a received message, press
MMenuN.
2
MbN: "Reply" a MOKN
3
Enter a message (page 42). a MOKN
4
Edit the destination phone number if
necessary. a MOKN 2 times
5
Continue from step 5, "Writing and
sending a new message", page 36.
SMS options while reading a
received message
a MOKN
You can perform the following operations
while you are reading a received message.
n Editing/forwarding a message:
MMenuN a MbN: "Edit Message"
n Erasing received messages:
MMenuN a MbN: Select "Erase" or
N
"Erase All".
n Storing the sender's number in the
phonebook:
MMenuN a MbN: "Add Phonebook"
n Editing the sender's number and calling
back:
MMenuN a MbN: "Edit & Call"
Note:
R After performing the above operation,
proceed to the next step by following the
display messages or pressing soft keys.
a MOKN
Other settings
Storing the PBX line access
number (for PBX users only)
Store your PBX line access number (4 digits
max.) so that SMS messages are sent
properly. When sending SMS messages to
entries in the phonebook or redial list, the PBX
N.
37
11/20/2013 1:50:57 PM