[Lamp Power]; [Function Button]; [Viera Link Settings] - Panasonic PT-AT5000E Operating Instructions Manual

[LAMP POWER]

Switch the lamp intensity according to the usage
environment of the projector and its intended use.
Switch settings
When higher luminance is
[NORMAL]
required
When lower luminance is
[ECO]
sufficient
Note
The brightness in the [ECO] settings is lowered
z
enabling saving power and reducing operating noise. It
is recommended that you use the [ECO] setting when
viewing in a place where natural light is blocked and
there is no artificial light.
When no input signal is detected, the function is disabled.
z

[FUNCTION BUTTON]

Display the function currently assigned to the
<FUNCTION> button of the remote control. Also,
cancel the assigned function.
■
How to cancel function assignment
1) Press the <ENTER> button.
The [FUNCTION BUTTON] confirmation message
z
is displayed.
FUNCTION BUTTON
FUNCTION BUTTON IS DISABLED.
OK
2) Select [OK] with the ◄ ► buttons.
3) Press the <ENTER> button.
Note
See "Using the <FUNCTION> button" in "Remote
z
control operation" regarding allocating operations to the

<FUNCTION> button. (
Switch settings
CANCEL
page 34)

[VIERA LINK SETTINGS]

Configure VIERA Link.
Press the <ENTER> button.
The [VIERA LINK SETTINGS] confirmation
z
message is displayed.
VIERA LINK SETTINGS
PICTURE VIERA LINK
POWER ON LINK
POSITION POWER OFF LINK
STANDBY POWER SAVE
INTELLIGENT AUTO STANDBY
LANGUAGE
VERSION : HDAVI Control 5
3D SETTINGS
LENS CONTROL
OPTION
■ VIERA LINK]
[
Set whether the VIERA Link control is active.
Switch settings
[ON] Active
[OFF] Inactive
When [VIERA LINK] is [ON], the following settings can be
made.
[POWER ON LINK]
[POWER OFF LINK]
[STANDBY POWER SAVE]
[INTELLIGENT AUTO STANDBY]
[OPTION] menu
ON
OFF
OFF
OFF
OFF
Switch settings
ENGLISH - 77