[Auto Switching] - Panasonic PT-AT5000E Operating Instructions Manual

■
[LENS MEMORY NAME CHANGE]
1) Press the ▲▼ buttons and select the
lens memory name to be changed.
LENS MEMORY NAME CHANGE
LENS MEMORY1
PICTURE
LENS MEMORY2
POSITION LENS MEMORY3
LENS MEMORY4
LENS MEMORY5
LANGUAGE
LENS MEMORY6
3D SETTINGS
LENS CONTROL
OPTION
2) Press the <ENTER> button.
[LENS MEMORY NAME INPUT] screen is
z
displayed.
LENS MEMORY NAME INPUT
A B C D E F
N O P Q R S
a b c d e f
n o p q r s
1 2 3 4 5 6
! " # $ % &
~
_ ` | ( )
OK
3) Press the ▲▼◄► buttons to specify
the location of the required character
to enter and press the <ENTER>
button.
You can enter up to 16 characters.
z
Select [ALL DELETE] and press the <ENTER>
z
button to erase all input text. If you press the
<DEFAULT> button on the remote control, you
can erase the character currently selected by
the cursor in the input box.
4) Press the ▲▼◄► buttons to select
[OK].
5) Press the <ENTER> button.
Note
Press the <ENTER> button without entering any text
z
to keep the default name ([LENS MEMORY 1] - [LENS
MEMORY 6]).
G H I J K L M ALL DELETE
T U V W X Y Z
g h i j k l m
t u v w x y z
7 8 9 0 SPACE
' + - / = ? @ \ ^
< > [ ] { } , . : ;
CANCEL
[LENS CONTROL] menu

[AUTO SWITCHING]

This function is able to automatically identify wide
signal *1 or 16:9/4:3 and automatically recalls lens
memory settings that have been set for each screen
size.
*1 : Wide signals are 2.35:1, 2.40:1, 2.50:1, 2.55:1 aspect
signals.
AUTO SWITCHING
PICTURE 2.35:1 IMAGE DETECTION
16:9 IMAGE DETECTION
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
1) Press the ▲▼ buttons and select the
item for automatic identification.
2) Press the ◄► buttons to select your
required lens memory for automatic
identification.
The [LENS MEMORY] setting which has been
z
selected for [2.35:1 IMAGE DETECTION] is loaded
after a given period of time once the input signal
switches from 16:9/4:3 to 2.35:1.
The [LENS MEMORY] setting which has been
z
selected for [16:9 IMAGE DETECTION] is loaded
after a given period of time once the input signal
switches from 2.35:1 to 16:9/4:3.
If [OFF] is selected, automatic identification will not
z
be performed.
When selecting the [ZOOM] or [V-FIT] in the
z
[ASPECT] setting, this function will be invalid.
Note
If the lens memory is not registered using [LENS MEMORY
z
SAVE], you cannot select [AUTO SWITCHING].
When displaying the menu or test pattern, auto-identify will
z
not be performed.
Images may not be correctly recognized if there is noise
z
in the picture or external device generates noise. Images
may also not be correctly recognized depending on the
video.
Images may not be correctly recognized if the input signal
z
level from the external device is not set to the suggested
value range. In this case, adjust the input signal level
using the [WAVEFORM MONITOR] menu. (
Images may not be correctly recognized if the screen
z
position is not correctly adjusted. In this case, adjust
the screen position using the [POSITION] menu.
(  page 57)
OFF
OFF

page 41)
ENGLISH - 71