[Lens Control] Menu; [Zoom/Focus]; [Lens Memory Load] - Panasonic PT-AT5000E Operating Instructions Manual

[LENS CONTROL] menu

Select [LENS CONTROL] from the main menu
of "Navigating through the menu" (
and choose an item from the submenu.
After selecting an item, adjust the screen position
z
using the ▲▼◄ ► buttons.
Remote control
Note
When 3D is being displayed (including converting 2D to
z
3D), the [LENS CONTROL] cannot be executed. Perform
the operation after switching to 2D.

[ZOOM/FOCUS]

[ZOOM/FOCUS] test pattern 1 is displayed.
Adjust so that the pattern size and focus are correct.
PATTERN CHANGE
FOCUS ZOOM
RETURN
1) Press the ◄► buttons to adjust the
[ZOOM] and ▲▼ to adjust the [FOCUS].
2) Press the <ENTER> button.
Test pattern 2 is displayed.
z
Recheck the focus.
Press the <ENTER> button once more to switch to
the input video, and press it once again to return to
test pattern 1.
PATTERN CHANGE
FOCUS ZOOM
RETURN
3) Press the <RETURN> button or <MENU>
button.
This returns you to the [LENS CONTROL] menu.
z
 page 37),
Projector controls
Test pattern 1
Test pattern 2
[LENS CONTROL] menu
Note
The [ZOOM/FOCUS] test pattern displayed on last use is
z
displayed first.
If the projector or the screen is angled, the top and
z
bottom edges of the image will become out of focus.
Align the focus to the centre of the screen.
If keystone distortion occurs, adjust [KEYSTONE] from
z
the [POSITION] menu.

( page 60)
For details of how to control the lens with the remote
z
control, see "Managing the lens control settings" in
"Remote control operation".
(  page 32)
If a 3D video signal is input when the [ZOOM/FOCUS]
z
test pattern is being displayed, you are returned to the
normal screen.
During 3D video display, you can adjust the zoom and
z
focus with the <ZOOM/FOCUS> button on the device
controls.

[LENS MEMORY LOAD]

You can recall saved zoom/focus adjustment
positions, horizontal video position, vertical video
position, mask amount adjustment values, or aspect
ratio settings.
LENS MEMORY LOAD
PICTURE LENS MEMORY1
LENS MEMORY2
POSITION LENS MEMORY3
LENS MEMORY4
LANGUAGE LENS MEMORY5
LENS MEMORY6
3D SETTINGS
LENS CONTROL
OPTION
1) Select the Memory name to be recalled
with the ▲▼ buttons.
2) Press the <ENTER> button.
The video adjustments for the recalled memory are
z
switched to.
Note
This lens memory function is not 100% guaranteed to
z
reproduce adjustments.
If the power is switched off during [LENS MEMORY
z
LOAD], when the power is switched back on may be in
the state before the power was switched off. In this case,
readjust the zoom and focus.
If there is no saved setting in the [LENS MEMORY
z
SAVE] or all the memory has been deleted in the [LENS
MEMORY DELETE], the [LENS MEMORY LOAD] menu
will not be displayed.
ENGLISH - 69