[Option] Menu; [On-Screen Display]; [Back Colour] - Panasonic PT-AT5000E Operating Instructions Manual

[OPTION] menu

Select [OPTION] from the main menu of
"Navigating through the menu" (
and choose an item from the submenu.
Select item and use the ◄ ► buttons to switch the
z
settings.
Remote control

[ON-SCREEN DISPLAY]

This enables setup related to ON-SCREEN DISPLAY.
Press the <ENTER> button.
The [ON-SCREEN DISPLAY] menu is displayed.
z
ON-SCREEN DISPLAY
INPUT GUIDE
PICTURE
OSD DESIGN
POSITION OSD POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
■ INPUT GUIDE]
[
Set the display method for the currently selected input port
name. This is displayed in the top right of the screen when
the <INPUT SELECT> button is pressed. (
Switch settings
Display the input terminal
[DETAILED]
graphically
[OFF]
Turn off the guidance
Display the name of input
[SIMPLE]
terminal only
 page 37),
Projector controls
DETAILED
TYPE1
CENTRE

page 34)
Switch settings
■ [OSD DESIGN]
Set the colour of the on-screen menu.
Switch settings
[TYPE1] Display using normal design
Display using black and white
[TYPE2]
design
■ [OSD POSITION]
You can change the displaying position of the on-screen
menu.
Switch settings
[CENTRE]
[LOWER LEFT]
[LOWER CENTRE]
[LOWER RIGHT]
[UPPER LEFT]
[UPPER CENTRE]
[UPPER RIGHT]

[BACK COLOUR]

Set the colour of the projection screen when no signal
is input.
Switch settings
Display the whole projection
[BLUE]
screen blue
Display the whole projection
[BLACK]
screen black
[OPTION] menu
Switch settings
Switch settings
Display in the centre of the
projection screen
Display in the bottom left
of the projection screen
Display in the bottom
centre of the projection
screen
Display in the bottom right
of the projection screen
Display in the upper left of
the projection screen
Display in the upper centre
of the projection screen
Display in the upper right
of the projection screen
Switch settings
ENGLISH - 73