Lens Shift And Positioning - Panasonic PT-AT5000E Operating Instructions Manual

Setting up

Lens shift and positioning

If the projector is not positioned right in front of the centre of the screen, you can adjust the projected image
position by moving the lens shift dials within the shift range of the lens.
■
Adjusting the lens shift
1) Remove the lens shift cover.
See "About your projector" (
z
open the lens shift cover.
2) Rotate the lens shift lever in the direction shown
in the figure (counterclockwise) to release the lock.
3) Adjust projection using the lens shift lever.
●
Horizontal shift
Adjust the projection by moving the lens shift lever horizontally according to the installation position of the
screen and projector.
Up to approximately
26% of the
projection screen
Move the lens shift
lever in direction A
●
Vertical shift
Adjust by moving the lens shift lever vertically according to the installation position of the screen and
projector.
Up to
approximately
100% of the
projection
screen
Up to
approximately
100% of the
projection
screen
Attention
Do not force the lens shift lever. If excessive force is placed on the lever, it may break.
z
4) Rotate the lens shift lever clockwise to fix.
5) Attach the lens shift cover.
24 - ENGLISH

page 19) regarding how to
Up to approximately
26% of the
Screen
projection screen
Move the lens shift
lever in direction B
Screen
Move the lens shift
lever in direction D
Move the lens shift
lever in direction C