Panasonic PT-AT5000E Operating Instructions Manual page 78

[OPTION] menu
■ POWER ON LINK]
[
Specify whether or not to switch the power of the projector
on when it is in standby by operating external devices.
Switch settings
[OFF]
[ON]
Note
Depending on the external device, the projector may
z
automatically turn on when some functions of the
connected devices are used. (Only in standby)
Due to the projector's characteristics, it takes time
z
before projection begins. Please be aware that video
may already have started by the time the projector is
operating fully.
■ POWER OFF LINK]
[
Specify whether to switch the power off for external devices
when this projector is set to standby.
Switch settings
[ON]
[OFF]
Note
This function works even if the projector enters standby
z
mode automatically through the [SLEEP] function.
There are cases where some external devices may
z
not be switched off depending on their status (currently
recording etc.)
78 - ENGLISH
Switch settings
Inactive
Switch projector power on along
with external devices
Switch settings
Switch the power of external
devices off along with this
projector
Do not switch the power of
external devices off along with
this projector
■ STANDBY POWER SAVE]
[
Specify whether or not to switch the mode of external
devices to the mode with minimum power consumption
when the projector is set to standby.
Switch settings
[OFF] Do not switch
Switch the mode of external
[ON]
devices to the mode with
minimum power consumption
Note
This function works when [POWER OFF LINK] is set to
z
[ON].
Depending on the external devices, when the projector
z
is turned on power consumption may increase even in
[STANDBY POWER SAVE] mode in order to achieve
faster start up.
■ INTELLIGENT AUTO STANDBY]
[
Specify whether or not to keep the power on for external
devices selected for input and switch the power off for
external devices not selected for input.
If you select [ON (WITH REMINDER)], a message is
displayed before the function operates.
Switch settings
Maintain the power on state of
[OFF] devices for which input is not
selected
After a confirmation screen is
[ON (WITH displayed, devices for which the
REMINDER)] input is not selected are set to
standby mode
[ON (NO Devices for which the input is not
REMINDER)] selected are set to standby mode
Note
This function may not work properly depending on the
z
external device.
Switch settings
Switch settings