Panasonic PT-AT5000E Operating Instructions Manual page 88

Care and replacement
20) Press the <MENU> button to display the
menu screen, select [OPTION] with the
▲▼ buttons, and press the <ENTER>
button.
21) Select [LAMP RUNTIME] with the ▲▼
buttons.
22) Hold the <ENTER> button down for 3
seconds.
The [LAMP RUNTIME] screen is displayed.
z
LAMP RUNTIME
23) Select [OK] with the ◄ ► buttons and
then press the <ENTER> button.
LAMP RUNTIME is reset to "0", and the projector
z
powers off. After a short while, the projector enters
standby mode.
■
Attaching the top cover
Hold the top cover as shown in the
diagram below, align the hinge with the
support, and while pushing the arm in the
direction of the arrow (inside projector)
push it into the groove.
Support
Hinge
Groove
88 - ENGLISH
LAMP RUNTIME RESET.
OK CANCEL
Arm