[Advanced Menu] - Panasonic PT-AT5000E Operating Instructions Manual

Note
You cannot adjust menu items that are displayed in grey
z
during split adjustment.
The [KEYSTONE] of [POSITION] becomes inactive
z
during split adjustment.
When a 3D signal is being input (including converting 2D
z
to 3D), the [SPLIT ADJUST] cannot be executed.

[ADVANCED MENU]

You can perform more detailed image adjustment
manually.
Press the <ENTER> button
The [ADVANCED MENU] is displayed.
z
■ [GAMMA ADJUSTMENT]
You can make detailed adjustments to the light intensity of
each input signal level by using the [ADVANCED] mode or
using the [SIMPLE] mode to adjust at 3 levels (high, mid,
low).
Note
You can only carry out the [GAMMA ADJUSTMENT]
z
through either the [ADVANCED] or [SIMPLE] mode. Both
settings cannot be used at the same time.
●
Adjusting the gamma (when [ADVANCED]
is selected for [ADJUSTMENT MODE])
1) Press the ◄► buttons to select
[ADVANCED].
GAMMA ADJUSTMENT
PICTURE ADJUSTMENT MODE
GAMMA HIGH
GAMMA MID
POSITION
GAMMA LOW
LANGUAGE POINT
Y ADJUST
R ADJUST
3D SETTINGS
G ADJUST
LENS CONTROL B ADJUST
INITIALIZE
OPTION
2)
Displays information about the current selected point
(A).
Default setting:
POINT [5] INPUT [50 %] OUTPUT [0]
[POINT]
[1] to [9]
[INPUT]
[1 %] to
ADVANCED
5
[OUTPUT]
[-252] to
[PICTURE] menu
Press the ▲▼ buttons to select [Y ADJUST]
and then press the <ENTER> button.
The [Y ADJUST] menu is displayed and a
z
maximum of 9 points are adjustable.
Y ADJUST
0% 50%
(A)
INPUT
POINT 5 INPUT 50%
Display the present selected point
number.
Numbers 1 to 9 are displayed from
the left of the input signal level.
Your selected point is indicated in
yellow on the graph.
Display the input level of the present
selected point.
Setting range: from 1 to 99 % in
increments of 1 %.
[99 %] Default settings: 10, 20,
30, 40, 50, 60,
70, 80, 90 %
Display the output level of the present
selected point.
Adjustable range depends on the
[+252] input level.
Default setting: 0
100%
OUTPUT 0
ENGLISH - 45