Projector Body - Panasonic PT-AT5000E Operating Instructions Manual

Projector body

■
Top and front view
Colour sensor window
However, this projector
is not equipped with a
colour sensor.
Temperature indicator
Lamp indicator
Power indicator
Air exhaust port
Remote control
signal receiver
Projection lens
Lens cover
Protects the projection lens from dust and dirt.
Attach the lens cover when
not using the device.
Attention
Do not place your hands or objects close to the exhaust port.
z
- Do not place hands or face near.
- Do not place near objects that are intolerant to heat.
- Inserting fingers may result in injury.
Hot air is expelled from the exhaust port and can cause burns,
injuries, and deformation.
Attention
Ensure that there are no build ups of dirt on the air intake and exhaust ports.
z
Do not place objects in front of the transmitter for the 3D Eyewear.
z
This may lead to the 3D Eyewear not operating correctly.
■
Controls for device
Power button
While the main power is on,
switch between standby mode
and projection mode.
Adjust the focus
About your projector
3D Eyewear transmitter
Transmits a signal for
3D Eyewear (optional
accessory) while viewing
3D video. (May appear as
a red dot when seen in a
dark area.)
Switch input
Use for menu screen
operation
Adjust the size of the
image
Air intake port /
Air filter cover
Controls for device
Lens shift lever
Lens shift cover
When the lens shift
cover is closed
Opening the lens shift
cover
Press the cover and
slide.
ENGLISH - 19