Invoking Machine Setup Functions; List Of Functions; Functions Of [Information] Key - MIMAKI JV5-160S Operation Manual

6 Operation for Functions

Invoking MACHINE SETUP functions

List of functions

This section describes briefly the machine setup functions and their setting values.
Name
DRYNESS FAN
DRYNESS FEED
CONFIRM. FEED
MEDIA CUT
TIME SET
UNIT SETUP
STAMP SETUP
Thickness DETECT
MACHINE NAME
INFORMATION

Functions of [INFORMATION] key

This section describes briefly the [INFORMATION] functions and their setting values.
Name
ERROR HISTORY
MAINTE. HISTORY
PRT.modeHISTORY
LIST
VERSION
Serial&DealerNo
6-16
Make operation settings of the exhaust fan.
Change the feed operation after printing.
Set whether or not to perform feeding the media after test printing for
checking of the printing result.
Allocate [ ] key to direct cut key.
Set the date and time on the printer.
Change the units of temperature, length and area to be used with the printer. p. 6-19
Make settings for outputting the date and time and printing conditions after
printing.
The media thickness detection is switched to Automatic or Manual.
When the printer is connected through the USB 2.0 interface to a system to
which two or more machines are connected, set the identifier of the printer
to have the system recognize it.
Display various information.
The items in [INFORMATION] can be set individually by pressing the
[INFORMATION] key.
Displays the history of errors.
Displays the records of the date and time when maintenance functions were
used.
Displays the history of information (printing conditions) of the online print-
ing that has been performed up to now.
Prints the data for the operator to check the settings of the printer.
Displays various version information of the equipment.
Displays serial No. and dealer No. of the printer.
Function
Function
Refer to
p. 6-18
p. 6-18
p. 6-18
p. 6-19
p. 6-19
p. 6-20
p. 6-21
p. 6-21
p. 6-21
Refer to
p. 6-21
p. 6-21
p. 6-21
p. 6-22
p. 6-25
p. 6-25