MIMAKI JV5-160S Operation Manual page 178

5 In Case of Trouble
7
When the display shown below appears, set the cleaning liquid cartridge in the ink
station.
Cleaning liquid is drawn up.
8
When the display shown below appears, remove the cleaning liquid cartridge from
the ink station.
The cleaning liquid drawn up is discharged to the waste ink tank.
9
On completion of one washing process, the display shown below appears.
If the heads are to be washed again, return to step 5 by pressing the [ ] key.
To terminate washing, press the [ ] key.
The display changes as shown below when all steps have been completed.
10
Press the [ ] key when this function is to be terminated without discharging the
cleaning solution.
Press the [ ] key when this function is to be terminated after discharging the clean-
ing solution.
If the washing procedure is to be terminated, press the [ ] key to go to step 12.
5-8
Set all washing
liquid cartridges.
1234 5678 9ABC DEFG
Remove all washing
liquid cartridges.
1234 5678 9ABC DEFG
Please select according
to situation.
COMPLETED < > W A S H
Do you discharge a
mainte.Wash.liquid ?
No < > Yes
More than 20 seconds remaining
It is being absorbed
PLEASE WAIT
00:40
Less than 20 seconds remaining
It is being absorbed
PLEASE WAIT
∗ ∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − − − − −
More than 20 seconds remaining
It'sBeingDischarged.
PLEASE WAIT
00:40
Less than 20 seconds remaining
It'sBeingDischarged.
PLEASE WAIT
∗ ∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − − − − −