Cooking Double/Triple Quantity With Memory - Sharp R-1900M Operation Manual

* Memory Cooking can be set in 6 operating ways.
There are multiple methods of selecting memories
depending on the input method selected and whether
or not Auto Start is turned on or off. To avoid mistakenly
selecting the incorrect memory, please confi rm your
settings by checking Custom Setting (see Custom Setting
1 and 2 on page 11).
<6 operating ways>
1. Dual Digit Input/Auto Start OFF (memory 00 - 99)
2. Dual Digit Input/Auto Start ON (memory 00 - 99)
3. Repeat Digit Input/Auto Start OFF (memory 0 - 29)
4. Repeat Digit Input/Auto Start ON (memory 0 - 29)
5. Single Digit Input/Auto Start OFF (memory 0 - 9)
6. Single Digit Input/Auto Start ON (memory 0 - 9)
HELPFUL TIPS for the Display of Memory Input Status
and the START pad
When Auto Start ON has been selected,
1. "0" should be displayed before entering memory
number.
When "0" is not displayed, open the door and close
to reset.
2. The START pad does not need to be pressed.
Cooking will automatically start when the memory
number is input.
1. Dual Digit Input/Auto Start OFF (with the Start pad)
* Suppose you want to cook with memory 2, which was
programmed for 10 seconds at 100%.
1 Place food in oven.
Enter memory number.
2 Press the START pad.
2. Dual Digit Input/Auto Start ON (without the Start pad)
* Suppose you want to cook with memory 12, which was
programmed for 10 seconds at 100%.
1 Place food in the oven.
Enter memory number.
3. Repeat Digit Input/Auto Start OFF (with the Start pad)
* Suppose you want to cook with memory 2, which was
programmed for 10 seconds at 100%.
1 Place food in oven.
Enter memory number.
2 Press the START pad.
R-1900M [EN].indd Sec1:8 R-1900M [EN].indd Sec1:8
Procedure
0 2
Procedure
1 2
Procedure
2
4. Repeat Digit Input/Auto Start ON (without the Start
pad)
* Suppose you want to cook with memory 12, which was
programmed for 10 seconds at 100%.
Procedure
1 Place food in oven.
Enter memory number.
5. Single Digit Input/Auto Start OFF (with the Start pad)
* Suppose you want to cook with memory 2, which was
programmed for 10 seconds at 100%.
Procedure
1 Place food in oven.
Enter memory number.
2 Press the START pad.
6. Single Digit Input/Auto Start ON (without the Start
pad)
* Suppose you want to cook with memory 2, which was
programmed for 10 seconds at 100%.
Procedure
1 Place food in oven.
Enter memory number.
Cooking Double/Triple
Quantity with Memory
Double/Triple Quantity is a feature where the oven will
automatically calculate how to cook two or three servings of
a programmed food. It does not simply double or triple the
time. Factory setting is multiplication factor 1.8 for double
quantity and 2.6 for triple quantity. Press the DOUBLE/TRIPLE
QUANTITY pad once for Double Quantity (2 servings), and
twice for Triple Quantity (3 servings).
* Suppose you want to cook 3 servings with memory
number 2 programmed Single Digit Input/Auto Start
ON.
Procedure
1 Place food in oven.
Press the DOUBLE/TRIPLE
QUANTITY pad twice.
2 Enter memory number.
NOTE : If your total cooking time is over the maximum time
allowed, error message EE9 will be displayed. Press the
STOP/CLEAR pad to clear the error message and reduce the
quantity or cook without using Double/Triple Quantity. For
details see Custom Setting 10 on page 15 and Maximum
Cooking Time on page 21.
8
2
x 2
2
2
x2/x3 x 2
2
9/29/08 1:36:31 PM 9/29/08 1:36:31 PM