Cooking With Memory - Sharp R-24AT Operation Manual

CHANGING THE TIMING REQUIRED BY THE MAGNIFICATION FACTOR FOR DOUBLE QUANTITY
The magnification factor for double quantity is preset 1.8 times the single quantity cooking time, but you
can alter this constant to suit your needs if the food needs more or less cooking time.
* Example: If you want to change the magnification factor to 1.67 in memory 1.
Step
Select set mode.
1
2 Press DOUBLE QUANTITY pad.
3
Select memory number.
Press MANUAL/REPEAT pad.
4
Set the magnification factor (1.67).
5
Press SET pad twice to complete the
6
setting.
Note: 1. In case you want to change the magnification factor it must be set for each key separately.
2. The magnification can be set from 0.00 to 9.99.
3. At step 1, the audible signal will not sound when the SET pad is pressed once but an
audible signal will sound when the SET pad is pressed twice.

COOKING WITH MEMORY

* Example: To cook using memory 1, which was programmed for 10 seconds at 100%.
Step 1
Select memory
number.
COOKING DOUBLE QUANTITY WITH MEMORY
* Example: To cook 2 servings by memory 1, (In this case the constant for double quantity is 1.8).
Step 1
Select double
quantity cooking
mode.
Note: 1. If the cooking time of double quantity is over the max time (see page 10), the display will show "EE9".
2. Double quantity means best time for cooking double quantity; it is not double the time.
3. The "MEMORY" cooking system does not require the use of the START pad. MEMORY cannot be used
to start the oven if a program is already on display.
Downloaded from: http://www.usersmanualguide.com/
Action
1
The programme will
1
DISPLAY
start after 1 second.
Step 2
Select memory
DOUBLE
number.
QUANTITY
Press pad
X 2
SET
within 2 sec.
DOUBLE
QUANTITY
1
MANUAL /
REPEAT
1
6
7
X 2
SET
NUMBER
ON
1
1
DISPLAY
8
Display
NUMBER
NUMBER
DOUBLE
NUMBER
DOUBLE
NUMBER
DOUBLE
NUMBER
DOUBLE
POWER
NUMBER POWER
DOUBLE
ON
1
The programme will
start after 1 second.