Sharp R-1900M Operation Manual page 20

Procedure
3
12 Enter power level for memory 2.
13 Press the SET MEMORY pad to
save memory 2.
14 Press the STOP/CLEAR pad to exit.
NOTES:
1. Press the SET MEMORY pad twice within 2 seconds.
2. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear the
error code, press the STOP/CLEAR pad and re-program.
See Maximum Cooking Time on page 21.
3. It is not necessary to press the POWER LEVEL pad for
100% in Single Stage.
Programming Multi Stage Cooking
* Suppose you want to set 4 minutes at 60% for the 1st stage
and 2 minutes at 30% for the 2nd stage with memory 2
using of Dual Digit Input.
Procedure
X 2
1 Press the SET MEMORY pad
twice within 2 seconds.
0 2
2 Enter the memory number.
3 Press the MANUAL/REPEAT pad.
4 0 0
4 Enter cooking time for 1st stage.
5 Press the POWER LEVEL pad.
R-1900M [EN].indd Sec1:19 R-1900M [EN].indd Sec1:19
Display
6 Enter power level for 1st stage.
NO.
7 Press the MANUAL/REPEAT pad.
8 Enter cooking time for 2nd stage.
9 Press the POWER LEVEL pad.
10 Enter power level for 2nd stage.
11 Press the SET MEMORY pad to
Display
NO.
12 Press the STOP/CLEAR pad to exit.
NOTES:
1. Press the SET MEMORY pad twice within 2 seconds.
2. If the programmed cooking time is over the maximum
time, the display will show error code EE9. To clear the
error code, press the STOP/CLEAR pad and re-program.
NO.
See Maximum Cooking Time on page 21.
3. It is not necessary to press the POWER LEVEL pad for
100% in the last stage in Multi Stage Cooking.
19
Procedure
6
2 0 0
3
save memory.
Display
NO.
9/9/08 2:37:21 PM 9/9/08 2:37:21 PM