Table of Contents
Advertisement
Memory Cooking can be started in 2 operating ways.
1. Program Lock Setting: LL1 or LL2
2. Program Lock Setting: L
1. Program Lock Setting: LL1 or LL2 (without the START
pad)
*
Suppose you want to cook with memory 2.
Procedure
1 Place food in the oven.
Then close the door.
Enter memory number.
2. Program Lock Setting: L (with the START pad)
*
Suppose you want to cook with memory 12.
Procedure
1 Place food in the oven.
Then close the door.
Enter memory number.
2 Press the START pad.
NOTE :
To change the Program Lock Setting, see page EN-11.
COOKING DOUBLE/TRIPLE QUANTITY
WITH MEMORY
Double/Triple Quantity is a feature where the oven will automatically
calculate how to cook two or three servings of a programmed
food. It does not simply double or triple the time. Factory setting
is multiplication factor 1.8 for double quantity and 2.6 for triple
quantity.
*
Suppose you want to cook 3 servings with memory number
2 with Program Lock Setting LL1.
Procedure
1 Place food in the oven.
Then close the door.
Press the TRIPLE QUANTITY pad.
2 Enter memory number.
NOTE :
Press the START pad after step 2 when the oven is set at Program
Lock Setting L.
SAVING MEMORIES
*
Saving Memories is available when the oven is set at the
Program Lock Setting L. See page EN-11.
*
Memory 1-10 are programmed as factory settings. See the
table of Programmed Memories on page EN-7.
*
Memories must be programmed before memory cooking
can be used.
Memory banks: 1-30
2
Power levels: 0-13 (See page EN-10)
Maximum Cooking Time:
Single stage cooking
Power Level 13-6: 15 minutes
Power Level 5-0: 60 minutes
Multi stage cooking
Total Cooking Time: 75 minutes
Details:
Power Level 13-6: a total of 15 minutes
Power Level 5-0: a total of 60 minutes
2
x 2
Maximum cooking stages: 7 stages
Multiplication factor for double/triple quantity: 0.01-9.99
1. Setting power level and time
*
Suppose you want to set 1 minute on 1500 W with memory 2.
1 Set the oven L (unlocked).
Close the door.
2 Press the SET MEMORY pad.
3 Enter memory number.
4 Enter power level.
x 3
1
2
5 Enter cooking time.
6 Press the SET MEMORY pad to
save the memory.
NOTES :
1. To set more than 2 stages, repeat steps 4 and 5 before
pressing the SET MEMORY pad in step 6. When pressing
the SET MEMORY pad in step 6, the total cooking time will
be shown in the display.
2. If the programmed cooking time is over the maximum
time:
* the SET MEMORY pad will be invalid.
* the power level for the next stage will not be entered.
3. To delete the program, press the POWER LEVEL pad
once in step 4. Then press the STOP/CLEAR pad.
EN-8
Procedure
2
x 4
0
0
Display
Advertisement
Table of Contents
