Sharp R-1900M Operation Manual page 17

NOTES:
1. Only Dual Digit Input method can be used when inputting
memory numbers in Multiplication Factor for Double/Triple
Quantity.
2. The multiplication factors can be set from 0.01 to 9.99 for
double quantity and triple quantity.
3. When you want to know the multiplication factor for triple
quantity, press the DOUBLE/TRIPLE QUANTITY twice at
step 1 after pressing the CUSTOM SETTING pad twice.
4. Multiplication Factors for Double/Triple Quantity can be
checked or changed before pressing the STOP/CLEAR pad
to exit for Custom Setting Function.
11. Express Defrost Setting
Express Defrosting uses 3 stages to defrost foods quickly.
The defrosting sequence is preset as follows, but you can
change the setting.
Defrosting Time
STAGE T x A1: (0.20*) + B1: (20*) sec.
1
STAGE T x A2: (0.13*) + B2: (30*) sec.
2
STAGE T - STAGE1 - STAGE2
3
Pause See the table for The Pause
Timing Timing below (50*)
T : INPUT TIME (TOTAL COOKING TIME)
* : The numbers in the parentheses are factory settings
and can be adjusted.
Express Defrost is preset to pause during the sequence
when 50% of total defrosting time has passed to check food.
Pause timings can also be adjusted.
Pause Timing
KEY Display
0 0 No pause.
1 1 After 10% of total cooking time.
2 2 After 20% of total cooking time.
3 3 After 30% of total cooking time.
4 4 After 40% of total cooking time.
5 5 After 50% of total cooking time.
6 6 After 60% of total cooking time.
7 7 After 70% of total cooking time.
8 8 After 80% of total cooking time.
9 9 After 90% of total cooking time.
START A After ending of each stage
R-1900M [EN].indd Sec1:16 R-1900M [EN].indd Sec1:16
Power Level
PL1 (40*) %
PL2 (30*) %
PL3 (20*) %
Pause Timing
16
* Suppose you want to change the Express Defrost set
factory settings to the following:
Defrosting Time
STAGE 1 T x 0.30 + 10 sec.
STAGE 2 T x 0.15 + 20 sec.
STAGE 3 T - STAGE1 - STAGE2
Pause When 70% of total defrosting time has
Timing passed.
Procedure
x 2
1 Press the CUSTOM
SETTING pad twice
within 2 seconds and
press the EXPRESS
DEFROST pad.
(The Express Defrost
setting of each
phase is shown for
1.5 seconds per 0.3
seconds until the
MANUAL/REPEAT pad
is pressed.)
2 Press the MANUAL/
REPEAT pad and enter
desired multiplication for
A1 at Stage 1.
(Ex: Enter 3,0 for 0.30.)
3 Press the MANUAL/REPEAT
pad and enter desired time
for B1 at Stage 1.
(Ex: Enter 1 for 10 seconds.)
4 Press the POWER LEVEL
pad and enter desired
power level for PL1 at
Stage 1.
(Ex: Enter 5 for 50%)
Power Level
50%
20%
10%
Display
(STAGE 1) (B2)
DEF. CHECK DEF. CHECK
(A1) (Power Level 2)
DEF. CHECK
DEF. CHECK
(B1) (STAGE 3)
DEF. CHECK DEF. CHECK
(Power Level 1) (Pause Timing)
DEF. CHECK DEF. CHECK
(STAGE 2) (Power Level 3)
DEF. CHECK DEF. CHECK
(A2)
DEF. CHECK
DEF.
3
DEF.
0
DEF.
DEF.
1
DEF.
DEF.
5
DEF.
9/9/08 2:37:20 PM 9/9/08 2:37:20 PM