Midas VERONA Operator's Manual page 24

group meters
+21 +21
+18 +18
+15 +15
Rear Panel
+12 +12
+9 +9
+6 +6
+3 +3
matrix
0 0
-3 -3
-6 -6
-9 -9
-12 -12
-15 -15
-18 -18
-21 -21
-24 -24 -24
XLR Wiring
aux aux
Pin 1 - Shield, Pin 2 - Hot Signal, Pin 3 - Cold Signal
mtx
direct mono
aux 1
0
Group (1-8) - The group level
sent to the matrix is continuously
+10
variable from off (-inf) to +6dB.
MUTE
Unity (0dB) is also marked on the
scale allowing signal to be routed
SOLO
to the
group
attenuation or gain.
aux
aux
c/o
pre
Each of the groups (1-8) has it's
group 1
own individual matrix send level.
group pre
to mtx fade
mono stereo
c
l r
pan
master
s i s
MUTE
group 1
SOLO
10
5
0
5
10
15
20
30
40
direct matrix direct
4 in 4 3
matrix without any
Verona Matrix Outputs Verona Matrix Outputs
matrix direct matrix
in 3 2 in 2
Front Panel
The matrix provides another four outputs from the console
which can be 'made' from a combination of the consoles
other outputs.
The matrix signal can be made by combination of the group
buss signals and mono, left and right master signals. They
can be used to drive additional speaker zones or as effects
sends from the groups (like the auxes from inputs)
mono
direct
input to
mtx stereo
0
0
+6
group 1
0
+20
SOLO
+6
group 2
0 0
+6
+6
group 3
mono master
0 0
+6 +6
group 4
left master
0
0
+6 +6
group 5
right master
0
0
+6
group 6
0
+10
matrix 1
MUTE
+6
group 7
0
SOLO
+6
group 8
matrix 1
Operators Manual - Page 22
The Verona's matrix outputs can
direct
be found on the rear of the
1 in 1
console.
Four male XLR sockets are
provided, one for each matrix
output.
Mono Master - The master mono signal
sent to the matrix is continuously variable
from off (-inf) to +6dB. Unity (0dB) is also
marked on the scale allowing signal to be
routed to the matrix
attenuation or gain.
Left Master - The master left signal sent to
the matrix is continuously variable from off
(-inf) to +6dB. Unity (0dB) is also marked
on the scale allowing signal to be routed to
the matrix without any attenuation or gain.
Right Master - The master right signal
sent to the matrix is continuously variable
from off (-inf) to +6dB. Unity (0dB) is also
marked on the scale allowing signal to be
routed to the matrix
attenuation or gain.
Alternatively, the auxiliaries can be routed
to the matrix by depressing the group/aux
changeover switch. This is especially useful
for generating additional monitor mixes or
re-routing existing monitor mixes (for
example if artists are moving around to
other parts of the stage).
The overall level of the matrix output is
controlled by the Matrix x
the number of the matrix 1 through 4) and
is continuously variable from off (-inf) to
+10dB.
Mute - The matrix output can be muted
immediately after the group and master
matrix sends.
Solo - The solo switch routes the matrix
signal to the mono PFL and the stereo AFL
buss.
without any
without any
pot (where x is