To Specify Device Settings - Konica Minolta BIZHUB 500 User Manual

4

To specify device settings

1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
"To display the Administrator Setting screen" on page 4-10 for more
details.)
2
In the Network Setting screen, touch [0 Detail Setting].
3
In the Detail Setting screen, touch [1 Device Setting].
The Device Setting screen appears.
4
Specify the desired settings.
5
Touch [OK].
The device information is set.
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
4-118
Specifying Settings From the Control Panel
bizhub 500/420 (Phase 2)