Registering Program Destinations; To Register A Program Destination - Konica Minolta BIZHUB 500 User Manual

Specifying Settings From the Control Panel
4.5

Registering Program Destinations

Program destinations can be registered. Only one destination can be
registered in a program. Up to 400 destinations can be registered in program
destinations, including fax program destinations. (If the optional hard disk
drive is not installed, up to 200 destinations can be registered.)

To register a program destination

1
In the Scan screen, touch [3 Program]. (Refer to "To display the Scan
screen" on page 4-6 for more details.)
2
Touch the button for the desired program number.
3
Touch [Edit].
The Program Setting screen appears.
4
Touch [Name] and type in the name using the keyboard that appears
on the screen.
5
Touch [OK].
bizhub 500/420 (Phase 2)
4
4-27