Konica Minolta BIZHUB 500 User Manual page 132

3
The file name is assigned by combining the information below.
The name "SKMBT_50004102315230" is explained below as an example.
Item
S
KMBT_500
04102315230
_0001
.TIF/.PDF
3-92
Description
Indicates the mode when the file was saved.
C: Copy
F: Fax
S: Scan
Indicates the name of the device that scanned the data. The
factory default is "KMBT_500" ("KMBT_420" on bizhub 420).
This name can be changed with the [Input Machine Address]
parameter on the [Administrator/Machine Setting] screen in
Administrator mode. A name of up to 10 characters can be
specified.
Indicates the year (lower 2 digits), month, day, hour, and
minute when the data was scanned. The last digit is a se-
quence number when data is scanned consecutively in 1
minute.
Indicates the page number when multiple pages of data are
scanned. This number does not appear on the "File Name"
screen, but is automatically attached as part of the file name
when transmitted over the network. If a file name receive con-
dition is placed on the server such as during a Scan to FTP op-
eration, take this section of the name into account.
The extension of the specified data type. These characters do
not appear on the "File Name" screen, but is automatically at-
tached as part of the file name when transmitted over the net-
work.
Scanning Documents
bizhub 500/420 (Phase 2)