Checking The Settings - Konica Minolta BIZHUB 500 User Manual
Network scanner operations
Hide thumbs
Also See for BIZHUB 500:
- Service manual (958 pages) ,
- User manual (794 pages) ,
- Shortcut manual (24 pages)
Table of Contents
Advertisement
3
3.7
Checking the Settings
Checking the Settings
The selected setting can be checked in detail. The destination can be
changed on this screen.
The settings that can be viewed and changed are as follows:
Item
Type
Name
Dest.
Edit
Set Dest.
Save in Add. Book
!
Detail
[Edit] is not displayed when "Manual Destination Input" is set to
"Restrict".
[Save in Add. Book] is not displayed when "Registering and Changing
Address" is set to "Restrict".
For details on the settings for "Manual Destination Input" and
"Registering and Changing Address", refer to the User manual [Copy
Operations].
Note
The notification destination cannot be specified when using Scan to
E-mail.
Note
If Changing the "From" Address from [Administrator Setting] — [System
Setting] — [Restrict User Access] — [Restrict Access to job Setting] is
specified as restricted, direct input cannot be performed.
3-84
Description
Displays the type of transmission.
Displays the registered destination name.
Displays the destination file path or the e-mail address.
Touch to change the destination.
Specify the notification destination for the e-mail message
that is sent when the data is transmitted, etc.
Touch when the address is not registered in the address book
such as when the address is entered through direct input.
Scanning Documents
bizhub 500/420 (Phase 2)
Advertisement
Table of Contents
