Program Default - Konica Minolta BIZHUB 500 User Manual

Specifying Settings From the Control Panel

Program Default

The default screen that appears in the Program tab in Scan mode can be
specified. (Default setting: PAGE1)
1
In the User Setting screen, touch [2 Display Setting].
– To display the User Setting screen, refer to "To display the User
Setting screen" on page 4-8.
2
Touch [3 Scan Basic Screen Default Setting].
3
Touch [Program Default].
4
Touch the button for the desired setting.
– Touch [
screen.
5
Touch [OK].
bizhub 500/420 (Phase 2)
] or [ ], and then touch the button for the desired
4
4-35