Specifying Settings From the Control Panel
3.23
Device Settings
Device information can be set.
Device Parameters
The device parameters are as follows:
Item
Mac Address
Network Speed
Reminder
When turning the main power switch OFF then ON, wait for 10 seconds
or longer before turning it ON again; otherwise the copier may not func-
tion normally.
The MAC address of this machine's network card is displayed under
"MAC Address".
To specify device settings
1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 3-8 for more details.)
2
In the Network Setting screen, touch [0 Detail Setting].
3
In the Detail Setting screen, touch [1 Device Setting].
The Device Setting screen appears.
4
Specify the desired settings.
bizhub 750/600
Description
Used to verify the machine's Mac address.
Sets the network speed.
Be sure to turn the main power OFF and then back ON after
changing the setting.
3
3-99