Using Active Directory - Konica Minolta BIZHUB 500 User Manual

4

Using Active Directory

Before specifying the settings, prepare the information described below.
- Administrator password (required)
- MFP IP address (required)
- Subnet mask (required)
- Default gateway
- Priority DNS server address (required)
- Substitute 1 DNS server address
- Substitute 2 DNS server address
- DNS default domain name
- DNS host name
- Active Directory default domain name (required)
- NTP server (Time Adjustment Setting) address
- List of the users for authentication (required)
!
Detail
When "Active Directory" is selected under "External Server
Authentication", specify a password with one character or more. If a
password is not specified, authentication will fail.
Do not use " " "and "+" in the external server password. For details on the
operating conditions of an external server, ask the network administrator.
If "Password Rules" is enabled, a password with less than 8 characters
cannot be registered. For details on the password rules, refer to User
manual [Copy Operations].
To perform user authentication by using an external server, touch [ON
(External Server)], and then specify the server type. Up to 20 servers can
be registered in "Active Directory".
When "Active Directory" is specified, [Domain Name] is displayed in the
User Authentication screen and you can log in by selecting a server from
the servers registered in "Active Directory".
4-162
Specifying Settings From the Control Panel
bizhub 500/420 (Phase 2)