Openapi Settings; Access Setting - Konica Minolta BIZHUB 500 User Manual

4
4.35

OpenAPI Settings

Specify whether or not interface is open to software with a function for
communicating with the copier. The settings for "Access Setting", "Port
No.", "SSL", and "Authentication" of OpenAPI can be changed.

Access Setting

Sets whether to permit access from other systems that use OpenAPI.
(Default setting: Allow)
1
In the Administrator Setting screen, touch [System Connection]. (Refer
to "To display the Administrator Setting screen" on page 4-10 for more
details.)
2
In the System Connection screen, touch [1 OpenAPI Setting].
3
In the OpenAPI Setting screen, touch [Access Setting].
Buttons for selecting settings appear.
4
Touch the desired selection key.
– To permit access using OpenAPI, touch [Allow].
– To prohibit access using OpenAPI, touch [Restrict].
Access using OpenAPI is set to be permitted or prohibited.
4-156
Specifying Settings From the Control Panel
bizhub 500/420 (Phase 2)