Connection With A Final Amplifier; Connecting The Vehicle's Aerial; Attaching To The Din Assembly Bracket - Silvercrest KH 2389 Operating Instructions Manual

· Insert the DIN 8-pole plug of the connecting cable
until it catches into the DIN 8-pole plug jack
AUX fq to the rear of the casing.
· Insert the DIN 8-pole plug to the other end of the
connecting cable until it catches into the DIN
8-pole plug-jack AUX of the CD changer.
í
Connection with a Final Amplifi er
Tip! Use fi ve Cinch connecting cables (insulation
and plug: white / red).
· Install the fi ve Cinch connecting cables in the
vehicle in accordance with their operation manual.
· Guide the fi ve Cinch connecting cables to the
fi nal amplifi er and carefully out of the front of
the DIN assembly bracket.
· Insert the red plug of the fi rst Cinch connecting
cable until it catches into the LINE IN R-Cinch
plug jack (red / right)
· Then insert the second red plug of the fi rst Cinch
connecting cables until it catches into the LINE
OUT R-Cinch-plug jack (red/right) of the fi nal
amplifi er.
· Insert the white plug of the second Cinch connect-
ing cable until it catches into the LINE IN L-Cinch
plug jack (white / left)
· Then insert the second white plug of the second
Cinch connecting cable until it catches into the
LINE OUT R-Cinch-plug-jack (white / left) of the
CD changer.
· Insert the red plug of the third Cinch connecting
cable until it catches into the REAR Cinch R plug
jack (loudspeaker connection (red / rear right))
· Then insert the second red plug of the third
Cinch connecting cable until it catches into the
REAR Cinch R plug jack (loudspeaker connection
(red / rear right)) of the fi nal amplifi er.
· Insert the white plug of the fourth Cinch connect-
ing cable until it catches into the REAR Cinch L
plug jack (loudspeaker connection (white / rear
gl
left)) .
· Then insert the second white plug of the fourth
Cinch connecting cable until it catches into the
REAR Cinch L - plug jack (loudspeaker connection
(white / rear left)) of the fi nal amplifi er.
· Insert the red plug of the fi fth Cinch connecting
KH2389_Radio_content_UK.indd 13 KH2389_Radio_content_UK.indd 13
fs
.
ft .
fu .
cable until it catches into the FRONT-Cinch plug
jack (loudspeaker connection (red/front right))
· Then insert the second red plug of the fi fth Cinch
connecting cable until it catches into the FRONT-
Cinch plug jack (loudspeaker connection (red /
front right)) of the fi nal amplifi er.
· Insert the white plug of the fi fth Cinch connecting
cable until it catches into the FRONT-Cinch
plug - jack (loudspeaker connection (white / front
gn
left)) .
· Then insert the second white plug of the fi fth
Cinch connecting cable until it catches into the
FRONT-Cinch-plug-jack (loudspeaker connection
(white / front left)) of the fi nal amplifi er.
í

Connecting the vehicle's aerial

· Guide the coaxial connecting cord of the vehicle's
aerial (powered aerial) carefully out of the front
of the DIN assembly bracket to the MP3 car ra-
dio - recorder.
· Insert the plug of the coaxial connecting cable
of the vehicle's aerial (powered aerial) until it
catches into the aerial jack
recorder.
· Connect the 12 V DC connecting cable of a
powered aerial with the aerial's plug-in
í
Attaching to the DIN assembly
bracket
· Insert the MP3 car radio - recorder with its rear,
jointly with the connected cables carefully into
the DIN assembly bracket.
· Be sure that the cable connector
in front of the connection jack
· Ensure that nothing covers the vents of the
dt
metal casing .
· Ensure that there is no cable caught between
dt
the metal casing and the DIN assembly
bracket. Avoid pinching as damage may lead
to short circuits and an interruption of the con-
nection cable.
· Insert the MP3 car radio - recorder into the DIN
assembly bracket until it distinctly snaps on.
Assembly
gm .
go of MP3 car radio -
fn .
cs is located
dp .
GB 13
08.09.2005 11:39:03 Uhr 08.09.2005 11:39:03 Uhr