Usb Pc Or Macintosh Keyboard; Usb Hid; Usb Com Port Emulation - Honeywell 4600g User Manual

USB PC or Macintosh
Scan one of the following codes to program the imager for USB PC Keyboard or
USB Macintosh Keyboard. Scanning these codes adds a CR and selects the
terminal ID (USB PC Keyboard - 124, USB Macintosh Keyboard - 125).
USB Keyboard (PC)
USB Japanese Keyboard (PC)

USB HID

Scan the following code to program the imager for USB HID barcode imagers.
Scanning this code changes the terminal ID to 131.

USB COM Port Emulation

Scan the following code to program the imager to emulate a regular RS-232-
based COM port. If you are using a Microsoft® Windows® PC, you will need to
download a driver from the Honeywell website
driver will use the next available COM port number. Apple® Macintosh comput-
ers recognize the imager as a USB CDC class device and automatically use a
class driver. Scanning the code below changes the terminal ID to 130.
Note: No extra configuration (e.g., baud rate) is necessary.
1 - 10
®
Keyboard
USB HID Barcode Imager
USB COM Port Emulation
USB Keyboard (Mac)
(www.honeywell.com/aidc . The
)