Qr Code - Honeywell 4600g User Manual

QR Code

QR Code
This selection applies to both QR Code and Micro QR Code.
* On
Note: The default applies to firmware with a base number of 31205480. Refer
to the Show Software Revision
determining the firmware revision in your unit
QR Code Message Length
Scan the barcodes below to change the message length. Refer to
Length Description
Maximum lengths = 1-3500. Minimum Default = 1, Maximum Default = 3500.
Minimum Message Length
< Default All QR Code Settings >
(page 7-2) for additional information. Minimum and
on page 11-2 for information on
Maximum Message Length
Off
Message
7 - 45