Wand Emulation Polarity; Wand Emulation Idle; Data Block Size - Honeywell 4600g User Manual

Wand Emulation Polarity

The Polarity can be sent as standard with black bars high, or reversed with
white bars high. Default = Black High.
* Black High
White High

Wand Emulation Idle

The idle describes the state of the imager when no data is being transmitted.
When in Wand Emulation mode, you must set the imager's idle state to match
the idle state for the device to which the imager is connected. Default = Idle
High .
* Idle High
Idle Low

Data Block Size

This transmits the data in smaller blocks to prevent buffer overflow. Default =
40.
20
* 40
60
80
6 - 5