LG LDV-S503 Owner's Manual page 25

Hide thumbs Also See for LDV-S503:
Table of Contents

Advertisement

Preset Settings
Preset position is the function to register camera
monitoring positions (preset positions) associated
with position numbers.
By entering the position numbers, you can move
cameras to the preset positions.
Note:
To activate this function, you need to register the
preset positions of the PTZ cameras.
To Register Preset Positions
1. Move the camera to a point you wish by using the
v/V/b/B.
2. Press SET or click the [SET] icon.
3. Select the preset number you wish to register.
4. Press ENTER or click the [§] icon.
The position and its number are memorized.
5. Repeat steps 1-4 to add additional positions.
Note:
Preset numbers from 0 to 255 are available on this
unit but the actual preset range differs depending on
PTZ cameras.
Changing to a Picture in a Preset
Position
The following function is available only with cameras
provided with the preset function.
The preset function makes the combination camera
move to the programmed preset position.
It is necessary to program preset positions for the
combination camera beforehand.
1. Press the MOVE button or click the [MOVE] icon.
2. Use number buttons to enter the memorized pre-
set positionʼs index number then press ENTER or
click the [§] icon. The camera moves to the preset
position and the picture of the camera in that posi-
tion appears on the monitor.
To Clear the Preset Position
You can clear a memorized preset position.
1. Press the CLEAR button or Click the [CLEAR]
icon.
2. Use number buttons to enter the memorized pre-
set index number then press ENTER or Click the
[§] icon to clear the preset positions.
Note:
This function may not be available depending on PTZ
cameras.
To Tour The Preset Positions
You can tour all preset positions.
1. Press the TOUR button or Click the [TOUR] icon.
All registered preset positions in the camera will
be selected and the camera position image will be
switched on the active monitor.
2. You can stop the tour by pressing the TOUR
button or clicking the [TOUR] icon.
Setup for PTZ Cameras
You can adapt the camera to your requirements by
setting up the respective items in menus.
1. Click the [SETUP] icon.
The setup menu appears in the selected window
of the main monitor.
2. Use arrows, ZOOM +/- and ENTER buttons to set
the options.
Notes:
• Refer to the manuals of the PTZ camera for more
details.
• Some PTZ cameras may not operated correctly
with this unit.
• You cannot control the other functions when the
PTZ virtual remote control is displayed.
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ldv-s504

Table of Contents