Attachment; Speaker-Microphone - Icom IC-F61M Instruction Manual

Uhf marine transceiver

Hide thumbs Also See for IC-F61M:

Table of Contents

■ Attachment

Attach the connector of the speaker-microphone into the [SP MIC]

jack on the transceiver and tighten the screw with a coin or flat

head screwdriver.

IMPORTANT: KEEP the [SP MIC] jack cover attached to the

transceiver when the speaker-microphone is not in use. (p. 3)

Water will not get into the transceiver even if the cover is not at-

tached, however, the terminals (pins) will become rusty, or the

transceiver will function abnormally if the connector gets wet.

CAUTION:

multi connector snugly, but

do not overtighten.

A loose connection will al-

low water intrusion into the

connector; an overtight-

ened connector will dam-

age the connector pins in

the transceiver.

Coin

Screw

Attach

the

Table of Contents