Options - Icom IC-F61M Instruction Manual

VOX gain and delay adjustment
q Attach the connector of the VS-1SC into the [SP MIC] jack on
the transceiver and tighten the screw.
• Toggle the toggle switch to [VOX].
w Push and hold [User Set Mode] for 1 sec. to enter the User Set
mode.
e Push [User Set Mode] several times to select "VOX Gain" or
"VOX Delay." Then, push [CH Up] or [CH Down] to set the de-
sired level/condition.
r Push and hold [User Set Mode] for 1 sec. again to exit the User
Set mode.
• VOX Gain
The VOX sensitivity level can be adjusted from OFF, or 1 through 6
for greater sensitivity.
• VOX Delay
The VOX delay time can be set from 0.5 to 3.0 sec. (in 0.5 sec.
steps) to set the interval before returning to receive.
NOTE: MIC/VOX gain can be adjusted by the adjusting pot
using a thin screw driver.
VOX gain level is 3 (default)
VOX delay timer is 0.5 sec. (default)
8

OPTIONS

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
42