Call Procedure - Icom IC-F61M Instruction Manual

■ Call procedure

When your system employs tone signalling (excluding CTCSS and
DTCS), this call procedure may be necessary prior to voice trans-
mission. The tone signalling employed may be a selective calling
system which allows you to call specific station(s) only and pre-
vent unwanted stations from contacting you.
q Select the desired TX code channel or 5-tone code according to
your System Operator's instructions.
• This may not be necessary depending on programming.
• Refer to pages
w Push [Call] (assigned to one of the dealer programmable keys).
e After transmitting, the remainder of your communication can be
carried out in the normal fashion.
Selective calling
17 and 18
for selection.
BASIC OPERATION
Non-selective calling
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
14