Creating A Top Menu - Panasonic HDC-SX5 Operating Instructions Manual

Disc and card management

Creating a top menu

A top menu is displayed when a
DVD-RAM is played back on other
devices that support AVCHD.
¬ Rotate the mode dial to select
and then select the [
1
Connect this unit to the AC
adaptor.
≥ Creating a top menu cannot be executed when
using a battery.
≥ If the power supply stops while creating a top
menu, the creating a top menu will fail and the
data may be damaged.
2
Press the MENU button, then
select [DISC SETUP]
[CREATE TOP MENU]
and press the cursor button.
3
When the confirmation message
appears, select [YES], then press
the cursor button.
≥ After creating the top menu, press the MENU
button to exit the message screen.
≥ If a top menu is created, the disc becomes
play-only and you can no longer record.
≥ The top menu that was created is not displayed
on this unit. It is displayed when the disc is played
back on other devices that support AVCHD.
≥ Except for DVD-RAM, the top menu is created
during finalizing.
96
VQT1G66
] tab.
#
[YES]
#
MENU
ª Deleting the top menu
If you insert a DVD-RAM which a top menu was
created on, the confirmation message appears
when you set a recording mode. If you select
[YES] to erase the top menu, the DVD-RAM can
be recorded and edited in the same way as
before the top menu was created.