Pre-Rec Function - Panasonic HDC-SX5 Operating Instructions Manual

PRE-REC function

This prevents you missing a shot.
This allows recording of the pictures and sound
to start approximately 3 seconds before the
recording start/stop button is pressed so you can
capture moments you would otherwise have
missed.
¬ When the mode dial is set to
an SD card is inserted in this unit
1
Open the LCD monitor or extend
the viewfinder.
2
Press the PRE-REC button.
The indication appears.
≥ Aim this unit at the subject and position it
securely.
≥ Recording of the pictures and sound starts
approximately 3 seconds before the recording
start/stop button is pressed.
3
Press the recording start/stop
button to start recording.
≥ There is no beep sound.
≥ After recording starts, the PRE-REC setting is
cancelled.
To end PRE-REC
≥ PRE-REC is also ended if you press the
PRE-REC button in PRE-REC.
≥ PRE-REC is cancelled in the following cases.
jIf you operate the mode dial.
jIf you turn the unit off.
jIf you open the card slot cover.
jIf you press the MENU button.
VIDEO
jIn quick start standby mode.
≥ When the remaining time left for recording
motion pictures is less than 1 minute,
PRE-REC cannot be set.
≥ If you start recording less than 3 seconds after
pressing the PRE-REC button, the PRE-REC
function is not activated and the pictures are
and
recorded normally.
≥ When the recording start/stop button is
pressed, image shake and operation sound
may be recorded.
Recording
53
VQT1G66