Panasonic HDC-SX5 Operating Instructions Manual page 136

Others
CANNOT FINALIZE.
CANNOT READ DISC.
PLEASE CHECK
CONDITION OF DISC.
CHECK CARD.
THIS CARD CANNOT
RECORD IN VIDEO MODE.
CARD LOCKED.
NOW ACCESSING.
PLEASE DO NOT REMOVE
CARD.
CARD FULL.
CANNOT OPERATE THIS
FUNCTION IN THIS MODE.
TOP MENU COULD NOT
BE CREATED.
CANNOT DIVIDE. THE
NUMBER OF SCENES IS
FULL.
CANNOT OPERATE.
INTERNAL TEMPERATURE
IS TOO HIGH.
INTERNAL TEMPERATURE
TOO HIGH. PLEASE TURN
UNIT OFF AND WAIT A
WHILE.
THIS BATTERY CANNOT
BE USED.
CANNOT RECORD IN AGS
MODE.
136
VQT1G66
The disc cannot be finalized (un-finalized) on this unit. (The disc
was recorded on another device etc.)
Or, you are trying to finalize a disc that has no motion pictures
recorded on it.
There are scratches or dirt on the recording/playback side of the
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l 25) If
the disc is scratched, insert a new one.
This card is not compatible or it cannot be recognised by the unit.
An 8 MB or 16 MB SD card on which motion pictures cannot be
recorded is inserted.
The write protection switch on the SD card is set to LOCK. (l 24)
The data is being processed. Close the card slot cover and wait for
a while.
The SD card is full so no further data can be recorded. Delete
unnecessary files (l 85, 90) or insert a new SD card.
PRE-REC cannot be set in disc recording mode.
Or, you are trying to copy a disc in STD playback mode.
Creating a top menu has failed.
There may be scratches or dirt on the recording/playback side of the
disc. If there is dirt on the disc, use a soft cloth to wipe it. (l 25)
The disc or SD card is full or the number of scenes has reached the
maximum limit so no further data can be divided. Delete
unnecessary scenes (l 85).
The temperature of the unit is high so it cannot be operated. Turn off
the power, wait until the unit cools and then turn on the power again.
Use a battery that you can use for this unit. (l 28)
You are attempting to connect an AC adaptor not compatible with
this unit. Use the supplied AC adaptor. (l 31)
If using a Panasonic battery compatible with this unit (l 28), eject
the battery and then insert it again. If the message appears even
after repeating this several times, this unit needs repair. Detach the
power and consult the dealer who you purchased this unit from. Do
not attempt to repair it by yourself.
The AGS function is activated. (l 50)